No announcement yet.

BGE table for Classic Joe

  • Filter
  • Time
  • Show
Clear All
new posts

  • BGE table for Classic Joe

    Please tell me what I'm getting wrong here. There's a BGE table near me at a great price. The cut out is 21" diameter. The lower shelf height is adjustable.

    Everything I read on here says the Joe will not fit but when I measure it, I'm getting a tight clearance but a fit. I measure the circumference just below the 22" diameter lip at 65". This translates to roughly 20.75" diameter giving an 1/8" clearance all around.

    The specs for the Classic table build call for a 23" hole. Somebody else's post on this forum claimed the Classic is 67" circumference in the same place I measured (twice).

    Any help? Is there a larger gap required for safety reasons? Are my measurements or math wrong?